--- title: "Lighting installation and design — MX2 Electrical" description: "Lighting installation and design by MX2 Electrical. Professional indoor and outdoor electrical lighting services across Poole, Bournemouth and Christchurch." canonical: "https://mx2-electrical-ltd.co.uk/services/lighting-installation" last_updated: "2026-08-25T12:53:09.068Z" --- # Lighting installation and design — MX2 Electrical > Lighting installation and design by MX2 Electrical. Professional indoor and outdoor electrical lighting services across Poole, Bournemouth and Christchurch. When you need new indoor fittings mounted or existing circuits altered, MX2 Electrical carries out lighting installations across Poole, Bournemouth and Christchurch. Our NAPIT registered electricians inspect circuit capacity, wire switching controls and connect fittings such as LED strip lighting safely. Every installation supports domestic properties and rental homes. ## Lighting installation price Work is charged at an hourly rate for straightforward installations and small alterations. Projects requiring extra cable routing, consumer unit work or specialist fittings are assessed based on the specific job requirements. - Sockets, lighting, cookers and smoke alarms: £70/hr - Covers standard labour for installing customer supplied light fittings onto existing wiring points and safe testing. - Excludes the cost of light fixtures, replacement cables, trunking, back boxes and specialist switching accessories. - Additional circuit runs, chasing into walls and making good decorative surfaces are quoted separately. ## Plan the lighting before choosing fittings Proper lighting design accounts for the age of your electrical installation, ceiling construction and switching needs across homes in Poole, Bournemouth and Wimborne. - **Older properties and ceiling structures:** Victorian and Edwardian houses in Westbourne and Parkstone often have lath and plaster ceilings or older wiring routes. We check cable condition and support structures before fitting heavier pendant lights or chandeliers. - **Circuit loading and LED upgrades:** Modernising to LED downlights or feature lighting reduces energy use but requires compatible dimmers and drivers. We verify that existing lighting circuits handle the driver loads without flickering. - **Outdoor and security lighting:** Exterior lights on coastal properties around Mudeford or Sandford need correct ingress protection ratings. We install weather-resistant fittings and automated sensors wired to dedicated switches. ## What the lighting work covers We install domestic and light commercial lighting setups according to UK safety standards. Here is what is included and what falls outside standard work. ### Included when agreed - Installation of pendant lights, flush fittings, downlights and wall lights - Fitting replacement light switches, dimmer switches and smart control units - Wiring new external security lights, floodlights and garden lighting - Safe isolation of circuits prior to mounting and connecting fittings - Testing circuit continuity, polarity and earth fault loop impedance ### Not included automatically - Supply of decorative light fittings unless agreed in advance - Plastering, painting or filling large chases cut into finished walls - Major consumer unit upgrades required to support substantial new load ## How a lighting job runs Here is the process followed on site during your lighting installation in Poole and surrounding areas. 1. **Circuit isolation and inspection:** We locate your consumer unit, isolate the relevant lighting circuits and test that no live voltage remains before disconnecting old fittings or handling cables. 2. **Mounting and cable connection:** We secure brackets into solid timber joists or suitable anchors, connect line, neutral and earth conductors correctly, and mount the light fittings securely. 3. **Switch configuration and verification:** We install and wire switches, configure multi-way switching or dimmer modules, and run instrument tests to confirm earth continuity and safe operation. ## What you receive Once the lighting installation is complete, you receive verified results and clear information about your installation. - **Installed lighting scheme:** All specified light fixtures mounted securely, correctly aligned, and wired to the property electrical system. - **Working controls:** Properly wired wall switches, dimmers, or sensors tested for smooth operation without buzzing, flashing, or tripping. - **Test results and certificate:** Completed electrical testing records confirming safe insulation resistance, polarity, and earth continuity, with NAPIT certification where applicable. - **Clear next steps:** Guidance on suitable replacement lamp types, wattage limits, dimmer compatibility, and any future maintenance recommendations. ## Lighting installation questions Common questions about lighting design, fitting replacement, and circuit safety in domestic and commercial properties. ### Can you install light fittings that I have purchased myself? Yes. I regularly install fittings supplied by homeowners, provided they are undamaged, complete with manufacturer instructions, and compliant with UK safety standards. I check the weight against ceiling fixings and confirm the fitting has adequate earthing before connecting it. ### Do my ceiling lights require an earth wire? Yes, modern metal light fittings require an earth connection for safety. In older homes around Poole and Bournemouth, older lighting circuits sometimes lack a circuit protective conductor. I test your existing wiring first; if no earth is present, I will advise you on installing double-insulated Class II fittings or rewiring the circuit. ### Why do my new LED bulbs flicker when used with a dimmer? LED bulbs require dedicated trailing-edge or LED-compatible dimmers that match their low wattage. Traditional leading-edge dimmers designed for halogen lamps often cause buzzing, flashing, or premature bulb failure. Replacing the wall switch with a compatible LED dimmer resolves the issue. ### Is notification required under Building Regulations for lighting work? Minor alterations such as replacing light fittings or switches on existing circuits do not require Building Regulations notification. However, adding new circuits or installing specific lighting in special locations like bathrooms may require notification and certification under Part P, handled through our NAPIT registration. ## Official electrical guidance Reference official UK regulations and safety advice concerning electrical installations and building compliance. - [Electrical Safety First homeowner guidance](https://www.electricalsafetyfirst.org.uk/safety-advice/your-questions-answered/): Advice and practical safety answers covering domestic wiring, lighting circuits and socket installations. - [UK Building Regulations approval guidance](https://www.gov.uk/building-regulations-approval/when-you-need-approval): Government information outlining when domestic electrical work requires formal notification under Part P building rules. ## Business facts - Based: Aldhelms Road, Poole, BH12 1AE - Service area: Poole, Bournemouth, Broadstone, Wimborne Minster, Wareham, Parkstone, Ferndown, Christchurch, Canford Heath, Westbourne - Hours: Every day 00:00–23:59 - Phone: +447397844504 - Email: info@mx2-electrical-ltd.co.uk - Insurance: Public liability £2,000,000 - Qualifications: Nvq level 3, City&Guilds; Gold Card Electrician - Pricing rules: Current labour rate: £70 per hour.; Materials, specialist equipment and larger project work are confirmed separately before they go ahead. ## Request a quote - [Start a request](https://mx2-electrical-ltd.co.uk/#chat): Send the job details and postcode to MX2 Electrical. ## Related pages - [Electrical Fault Finding & Repair](https://mx2-electrical-ltd.co.uk/services/electrical-fault-finding): Find and repair electrical faults. - [House Rewiring](https://mx2-electrical-ltd.co.uk/services/house-rewiring): Full and partial house rewiring. - [Fuse board replacement](https://mx2-electrical-ltd.co.uk/services/fuse-board-replacement): Consumer unit and fuse board replacement. - [EICR](https://mx2-electrical-ltd.co.uk/services/eicr): EICR testing and electrical safety reports. - [EV charger installation](https://mx2-electrical-ltd.co.uk/services/ev-charger-installation): Home and workplace EV charger installation. - [Full sitemap](https://mx2-electrical-ltd.co.uk/sitemap.md): Complete machine-readable page directory.