Lighting Installation in Poole
Lighting fitted and replaced across Poole, indoors and out, with the ceiling build, the existing circuit and the protection checked before the work is priced.
“With over 20 years in the trade behind us, we are a fully qualified, NAPIT registered team covering Poole and the Dorset area, domestic and commercial. We turn up when we say we will, explain what needs doing before we do it, and leave the place as we found it.”
How much does lighting installation cost in Poole?
Lighting installation in Poole starts from £70/hr. That starting price is for sockets, lighting, cookers and smoke alarms.
- The hours on site rise with the number of fittings, the rooms involved and how the cable has to run through the house.
- Swapping one pendant is a shorter visit than adding new lights in several rooms or on an outside wall.
- Current labour rate: £70 per hour.
- Materials, specialist equipment and larger project work are confirmed separately before they go ahead.
Lighting installation in Poole
- A Poole house, rental or business that needs new lights, replacement fittings or extra lighting is covered by MX2 Electrical from £70/hr.
- You want brighter rooms, extra fittings or a switch layout that matches how you use the house.
- A rental needs working lights, replacements between tenancies, or extra fittings before the next occupier moves in.
- A Poole shop or office needs the lights fitted around the premises so staff can keep using the building.
Lighting in Poole houses and flats
- Poole lighting work follows the house you have, from Georgian rooms by the Quay to 1960s estates in Canford Heath.
- Georgian houses beside the Quay have sat in a conservation area since 1975, so new lights have to sit neatly in original ceilings and walls.
- Canford Heath was built from 1963 in the south and 1973 in the north, so lighting often sits on circuits from those decades.
- Edwardian and interwar houses in BH12, and the 1970s estate off Winston Avenue, each need lights fitted to the ceilings of that period.
What happens on the day
MX2 Electrical arrives at your Poole property, fits the lights you booked, then tests them before leaving.
- 01
Arrival at your property
We walk the rooms with you, check the existing fittings and switches, and confirm which lights are going in.
- 02
Fitting the new lights
We isolate the circuit, take down the old fittings where needed, install the new lights and restore power when they are ready.
- 03
Testing and handover
We test every new light and switch, show you how they work, and leave the rooms tidy.
Other electrical work in Poole
Fuse board replacement, house rewiring, EICR testing and extra sockets in Poole are booked as their own jobs beside lighting installation.
What Poole lighting customers come for
Lighting costs go on paper first. Registration sits with NAPIT and TrustMark. In Poole we walk the rooms before fittings move, then put each space back as it was.
Public liability £2,000,000 · NVQ Level 3, Gold Card Electrician · NAPIT · TrustMark
Book Online
Recent work from MX2 Electrical
These photographs show work completed across the wider service area covered by MX2 Electrical; they are not all presented as lighting installation work in Poole.
Lighting installation areas in Poole
MX2 Electrical installs lighting in Parkstone, Branksome, Canford Heath, Hamworthy, Canford Cliffs, Oakdale and the BH12, BH13, BH14, BH15 and BH17 postcodes.
Questions about lighting installation in Poole
The hourly price, whether power stays off, and how lighting sits in Old Town and BH13 flats are the usual Poole lighting questions.
How much does lighting installation cost in Poole?+
Lighting installation in Poole starts from £70/hr for sockets, lighting, cookers and smoke alarms. The hours depend on how many fittings you need and how the cable has to run through the house. Written prices come before MX2 Electrical starts the work.
— Mohsen Nazari
Do you fit lighting in Poole homes and businesses?+
Yes, MX2 Electrical fits lighting for homeowners, landlords and businesses in Poole. Domestic lighting is done inside the home with a tidy finish, and commercial lighting is planned around the premises. The starting price is from £70/hr.
— Mohsen Nazari
Will the power be off while you fit new lights in Poole?+
MX2 Electrical isolates the lighting circuit at your Poole property while fittings come down and new lights go in. Power returns to that circuit once the new lights have been tested. We tell you which rooms will be without lights during the visit.
Can you fit lights in Poole Old Town?+
Yes, MX2 Electrical fits lighting in Poole Old Town beside the Quay. Those Georgian houses have been in a conservation area since 1975, so new fittings have to sit neatly in the existing ceilings and walls. The starting price is from £70/hr.
Do you install lighting in flats in Canford Cliffs and Sandbanks?+
Yes, lighting work in BH13 covers large detached houses and apartment blocks in Canford Cliffs and Sandbanks. A flat is the rooms inside that unit, not the whole block. MX2 Electrical prices the lighting from £70/hr.
Do you add extra lights as well as replace old ones in Poole?+
Yes, MX2 Electrical replaces existing fittings and adds extra lights in Poole houses and business premises. Adding a new fitting can mean extra cable from the board or from a nearby lighting point. That work still starts from £70/hr.
Can I book lighting installation in Poole online?+
Yes, lighting installation in Poole is booked through Book Online, and the booking line answers at any time. That line takes the booking, not an electrician at the door at every hour. Written prices come before the visit starts.
Is lighting installation the same as an EICR in Poole?+
No, lighting installation in Poole is fitting or replacing lights, from £70/hr. An EICR is a condition report on the electrics, from £110. MX2 Electrical prices each as its own job.
Book Online
The booking line is picked up around the clock, and Poole lighting visits are arranged on the website.