EV charger installation in Poole
Drivers in Poole fitting a home charge point can have the unit installed by MX2 Electrical, on driveways, in garages and at business premises with off street parking.
“With over 20 years in the trade behind us, we are a fully qualified, NAPIT registered team covering Poole and the Dorset area, domestic and commercial. We turn up when we say we will, explain what needs doing before we do it, and leave the place as we found it.”
How much does an EV charger cost in Poole?
EV charger installation is priced from £300, covering the fitting of the unit and the dedicated circuit that feeds it from your consumer unit.
- £300 is a starting price, and what changes yours is the distance from the board to the parking space, the spare capacity in that board and the charge point you pick.
- You get the price in writing before any work begins, so nothing on the invoice arrives as a surprise.
- Current labour rate: £70 per hour.
- Materials, specialist equipment and larger project work are confirmed separately before they go ahead.
Who needs an EV charger fitted in Poole?
- An EV charger installed at home or at work in Poole starts at £300 and gives the car its own circuit from your consumer unit.
- A driveway, garage or carport fixes the charge point position, and the distance back to the board sets the cable length.
- A household socket and a trailing lead were never made for charging every night, and a wired charge point replaces both.
- The charge point becomes part of the property's electrical installation, tested and certificated along with the circuit feeding it.
EV chargers in Poole houses and flats
- Where a charge point goes in Poole depends on the age of the building, the position of the meter and how far the cable travels to the parking space.
- Old Town was rebuilt in Georgian style in the eighteenth century and has been a conservation area since 1975, so external cable placement matters.
- The estate was built out from 1963 in the south and 1973 in the north, so boards and supply arrangements differ street by street.
- Edwardian and interwar houses sit beside a 1970s estate off Winston Avenue, so we check the main fuse and board before pricing.
What happens on the day
Fitting a charge point takes three stages, from checking the incoming supply to handing you the certificate.
- 01
We check the supply and the board
We look at the main fuse rating, the meter position, the earthing arrangement and the spare capacity in your consumer unit.
- 02
We mount and wire the charge point
The unit goes on the wall or post you have chosen, and a dedicated protected circuit is added at the consumer unit.
- 03
We test it and hand over the certificate
We test the new circuit, show you how the charge point works and leave you the electrical installation certificate for it.
Other electrical services in Poole
MX2 Electrical also carries out consumer unit replacement from £500, EICR testing from £110, electric shower installation from £150 and fault finding from £70 an hour.
Why customers in Poole choose MX2 Electrical
MX2 Electrical is registered with NAPIT and TrustMark, puts every price in writing and tests the finished charge point circuit before leaving. Homeowners, landlords and businesses use the same company for a single socket or a three phase installation.
Public liability £2,000,000 · NVQ Level 3, Gold Card Electrician · NAPIT · TrustMark
Book Online
Recent work from MX2 Electrical
These photographs show work completed across the wider service area covered by MX2 Electrical; they are not all presented as EV charger installation work in Poole.
Areas we cover around Poole
MX2 Electrical covers Parkstone, Branksome, Canford Heath, Hamworthy, Canford Cliffs and Oakdale, across BH12, BH13, BH14, BH15 and BH17.
Poole, Bournemouth, Broadstone, Wimborne Minster, Wareham, Parkstone, Ferndown, Christchurch, Canford Heath, Westbourne
EV charger questions from Poole customers
The questions Poole drivers, landlords and business owners ask before booking a charge point.
How much does it cost to install an EV charger in Poole?+
Installation starts at £300. The distance from your consumer unit to the parking space and the spare capacity in the board account for most of the difference. We put the full figure in writing before work starts.
— Mohsen Nazari
Do I need a new fuse board for an EV charger?+
Not always. What matters is whether your board has a spare way and the right protective device for a charging circuit. If it does not, consumer unit replacement starts at £500.
— Mohsen Nazari
Can a charger be fitted at a flat in Canford Cliffs or Sandbanks?+
It depends on which meter serves your parking space and how the cable reaches it. Apartment blocks in BH13 sit on a shared supply, so we check that before anything else. We tell you what is possible before you book.
Is a 7kW charge point better than a three pin socket?+
A 7kW charge point supplies roughly three times the power of a 13A socket. It is also wired and protected to run at that level continuously, which a household socket is not.
Does an EV charger have to be notified?+
Yes. A new charging circuit is notifiable work, and MX2 Electrical is registered with NAPIT, so it reaches building control through the scheme. The local electricity network operator is told about the charge point too.
Can you fit a charger in a detached garage or outbuilding?+
Yes. An outbuilding takes its own supply from the board, with the cable either buried or clipped along the building. The length of that cable is the main thing that changes the price.
My charger keeps tripping the electrics, can you look at it?+
Yes. Fault finding and repairs start at £70 an hour. We test the charging circuit, the protective device and the unit itself to find which one is at fault.
Book Online
Need an EV charger fitted in Poole? Reserve a slot here, or ring the line that picks up around the clock.